What is nfpa 25

There are also specific requirements that might prompt further inspection — such as the presence of corrosion on certain elements.

Leaks should be reported before the inspection so that additional attention can be paid to their area. It isn't much you should do specifically to get things ready for an NFPA 25 inspection other than to do a rudimentary check on your sprinklers, valves, and pipes to ensure that there are no obvious signs of corrosion or leaks.

If you are dry-testing individual components, make sure that you know where the shutoff valve is. Sometimes you may need to kill the flow in advance to ensure that the system will be in a proper condition for testing when it comes.

If in doubt, consult a specialist in advance to be sure that everything will be prepared adequately. It's a good idea to take notes during the inspection to ensure that you'll be better prepared in the future.

This is the kind of process where you can benefit from prior knowledge, even when you support a dedicated specialist assisting you through it. Don't leave any doubts hanging in the air either, because it's better to resolve those questions well in advance rather than finding out that you have to modify the test — or postpone it all together — in the middle of the whole ordeal. When done right, this is a relatively hassle-free process that will ensure that everything is in order with your building in the long term when it comes to fire safety.

Fire protection systems minimize the risk of damage and loss of lives by quenching fire within seconds. These systems suffer wear and tear issues like any other building system. The regular, timely inspection and testing of the fire protection systems as per NFPA 25 will ensure that they are optimal and provide your facility with an extra protection level.

So you must perform mandated inspections to avoid any violations and save yourself from hefty penalties. Call Us Today! Our Blog Team. How do I prepare for a fire inspection? Final Words. The as-built drawings, including acceptance test and manufacturer sheets, shall be maintained for the life of the system, and ITM reports shall be maintained for a minimum of one year after the next ITM.

Water Supply Status -the water supply must not be interrupted during ITM unless attended by a qualified person or the requirements of Chapter 15 are followed, this includes shutting down the fire pump for normal flow testing. Inspection — states that components shall be inspected in accordance with the prescribed frequencies with in NFPA Testing — states components shall be tested to verify that they work as intended.

Automated inspection and testing — this is relatively new to NFPA 25, but it is a technology that is rapidly growing in the fire protection industry. This section allows for building owners to conduct ITM remotely, through automated devices, and allows frequencies, such as flowing water for an inspectors test, to be done on greater frequencies. The remaining sections refer to maintenance, safety, confined spaces, fall protection, hazards, hazardous material, and electrical safety.

Since NFPA standards are recognized internationally, the standard does not go into great detail, because many of these requirements change from country to country. As we can see there is a copious amount of important information, guidance, and placement of responsibilities in this chapter. Owners and all parties involved in the ITM of fire protection systems should thoroughly understand this chapter of the standard and fully comprehend their role, as well as roles of the other stakeholders involved in the ITM process.

Sign In Store. NFPA 25 4. This chapter also covers many other very important topics such as: Freeze protection — sets the requirements for maintaining a minimum of 40 degrees F where there is water filled pipe. Extinguishment of the fire, which resulted in the deaths of three firefighters and injuries to two dozen others, was hampered by numerous failures, including inadequate water pressure in fire attack hose lines. Klem, now a fire protection engineering consultant heading up T.

The importance of adhering to national consensus standards such as NFPA 25 is obvious, and compliance with them can prevent similar tragedies. If adopted and enforced in your jurisdiction, compliance with NFPA 25 will provide assurance that all the systems in your care remain well maintained and operational.

Bringing your jurisdiction a set of requirements to ensure routine testing of water-based fire protection systems is another step toward greater public safety for the people of Illinois, starting with your jurisdiction. Key Resources. NFPA 25 Guide Standard guide for the inspection, testing, and maintenance of water-based fire protection systems.